Product Details

Product Introduction

304L stainless steel is a universal stainless steel material.

304L Stainless steel Brand:

The old standard JB/T 4237-1992 corresponds to 00Cr19Ni10

New STANDARD GB/T 20878-2007 Stainless steel and heat resistant steel grades and chemical composition

And GB 24511 2009 stainless steel plates and belts for pressure equipment

Above corresponds to 022Cr19Ni10, and its carbon content is about 0.03%

Uniform code S30403 differs from S30408 of 304

Product Detail

Grade: 300 Series

Standard: JIS, AISI, ASTM, GB, DIN, EN

Length:Coil

Width:50mm-1800mm

Place of Origin:WUXI China

Brand Name: Tisco Bao Steel

Model Number: 304L

Type:Coil

Application: kitchen, industry

Certification: ISO

Product name:304L Stainless Steel Coil

Surface: 2B/NO.4/HL/NO.1/BA

Thickness: 0.2mm-60mm

Brand: TISCO JISCO LISCO BAOSTEEL

Technique:Cold Rolled Hot Rolled

Edge: Mill Edge Slit Edge

Price Term: CIF CFR FOB EX-WORK

Packing:Standard Sea-worthy Packing

Sample: Available

Delivery time:Negotiable

Chemical component

Name: 304L stainless steel plate, 304L stainless steel plate, 304L stainless steel 8K plate
Brand No. : 00Cr19Ni10 (0Cr18Ni10)
Chemical composition %
P: 0.035 or less
S: 0.03 or less
Cr: 18.0 ~ 20.0
Ni: 8.0 ~ 10.0

Density

Steel Grade ; Density(g/cm3)

304,304L,305,321201,202,301,302 7.93

316,316L,347309S,310S 7.98

405,410,420 7.75

409,430,434 7.7

Executive standards

304L stainless steel is a universal stainless steel material.

304L Stainless steel Brand:

The old standard JB/T 4237-1992 corresponds to 00Cr19Ni10

New STANDARD GB/T 20878-2007 Stainless steel and heat resistant steel grades and chemical composition

And GB 24511 2009 stainless steel plates and belts for pressure equipment

Above corresponds to 022Cr19Ni10, and its carbon content is about 0.03%

Uniform code S30403 differs from S30408 of 304

Mechanical property

Yield strength (N/mm2) ≥205
Tensile strength ≥520
Elongation (%) ≥40
Hardness HB ≤187 HRB≤90 HV ≤200
The density of 7.93 g · cm - 3
Specific heat c (20 ℃) 0.502 j. (g · c) - 1
Thermal conductivity /W(m·℃)-1 (at the following temperature /℃)
20 100 500
12.1 16.3 21.4
Linear expansion coefficient /(10-6/℃) (between the following temperatures /℃)
20 ~ 100 20 ~ 200 20 ~ 300 20 ~ 400
16.0 16.8 17.5 18.1
Resistivity Ω, was, 0.73 m - 1
Melting point 1398 ~ 1420℃

Surface description

A rough, matte surface heated to a specified thickness and then annealed and descaled without the need for a gloss finish

Silver-white cold rolled, heat treatment, pickling, and sometimes a final light roll on the surface of a matte surface processing 2D product used for applications where surface requirements are lax, for general use, for deep drawing

Product specification

The 304L is a variation of 304 stainless steel with a low carbon content and is used where welding is required.The lower carbon content minimizes the carbide precipitation in the heat-affected zone near the weld, which may result in intercrystalline corrosion (welding erosion) of stainless steel in some environments.

Range of application

Household articles (1, 2 type tableware, cabinet, indoor pipeline, water heater, boiler, bathtub);Auto parts (windshield wipers, mufflers, mold products);Medical equipment, building materials, chemistry, Food industry, Agriculture, ship parts.

Our Service

The perennial stock of the company has reached more than 8000 tons to become one of the largest and most complete domestic spot platform.

As a large manufacturer, we can produce products according to the needs of different customers, which can reduce customers' production cost, improve utilization rate, help customers reduce waste and save cost.

http://www.jshgoldencoral.com/