TitleProduct

Must 45A 60A Portable MPPT Solar Inverter Charger for Solar Cell Charging

  • Price:

    Negotiable

  • minimum:

  • Total supply:

  • Delivery term:

    The date of payment from buyers deliver within days

  • seat:

    Guangdong

  • Validity to:

    Long-term effective

  • Last update:

    2017-08-05 04:41

  • Browse the number:

    194

Send an inquiries

Company Profile

Shenzhen Must Power Limited

By certification [File Integrity]

Contact:Ms. Tina(Mr.)  

Email:

Telephone:

Phone:

Area:Guangdong

Address:Guangdong

Website: http://mustups2010.sweetherbfood.com/

Product Details

MUST 45A 60A portable MPPT solar inverter charger for solar cell charging
Model:PC1600A

Descriptions
Support a wide variety of system designs
Must PC1600 Charge Controllers truly represent innovation in Maximum Power Point Tracking (MPPT) technology, which enables them to increase the yield from a solar photovoltaic (PV) array as much as 30% over conventional designs. PC1600 Charge Controllers support a wide variety of system designs, battery chemistries, and integrate seamlessly in terms of system data management and programming.

PV system designers met the challenge of delivering both grid-tied savings during normal times and off-grid independence during emergencies with 1-phase arrays of Must IPV3000W/IPV5000W inverter/chargers powering your house. This system saved money on utility bills, supply essential power during emergencies (all with one versatile system).

Features
· 45A/60A MPPT solar charge controller
· 24V/48V auto work
· PV Output: 70V-145V
· Several seconds tracking speed
· High Tracking efficiency of 99%
· Multiphase synchronous rectification technology
· Peak conversion efficiency of 98%
· DSP processors architecture ensures high speed and performance
· Multifunction LCD displays system data and status
· Four stages charging optimizes battery performance

Electronic Protections
· PV array short circuit
· PV over current
· PV over voltage
· PV reverse polarity
· Battery reverse polarity
· Over charging
· Overheating protection

A charge controller's main job is to optimize a PV array's output which can fluctuate based on shading and temperature variables found on the average roof.

Must™ PC1600 Charge Controllers truly represent innovation in Maximum Power Point Tracking (MPPT) technology, which enables them to increase the yield from a solar photovoltaic (PV) array as much as 30% over conventional designs. PC1600 Charge Controllers support a wide variety of system designs, battery chemistries, and integrate seamlessly in terms of system data management and programming.

The innovative PC1600 MPPT software algorithm is both continuous and active, increasing photovoltaic array power yield up to 30% compared to non-MPPT controllers. Thanks to active cooling and intelligent thermal management cooling, both PC1600 Charge Controllers can operate at their full maximum current rating, 40 AMPS or 60 AMPS respectively, in ambient temperatures as high as 113° F (45° C).

PC1600 Charge Controllers incorporate the features developed by Must™ , including support for a wide range of nominal battery voltages and the ability to step-down a higher voltage solar array to recharge a lower voltage battery bank. A built in, backlit 70-character display shows the current status and set the key parameter at the touch of a button.

------------------------------------------------------------------------------------------
Specifications
Model PC16-4515F PC16-6015F
Default Battery system Voltage 24v/48vdc(adjustable)
Charge Input
PV Open Circuit Voltage range Operational max=145VDC temperature correct VOC
Max PV input power(24v) 1200W 1600W
Max PV input power(48v) 2400W 3200W
Battery voltage
Nominal Voltage 24V / 48V
Absorption Voltage 27.0V / 54.0V
Refloat Voltage 27.4V / 54.8V
Float Voltage 28.6V / 57.2V
Low voltage protection point 21.0V / 42.0V
DC Output
Output Voltage 22.0-28.6V / 44V-57.2V
Rated Current 45A continuous @40 ambient 60A continuous @40 ambient
Warning for low voltage 23.0V / 46.0V
Cut off for low voltage 21.6V / 43.0V
Low voltage recovery 26.0V / 46.0V
Display
LED indication Systematic operation, LV indication, LV protection, over charge protection, loads protection, short circuit protection
LCD display(optional) Charge voltage, charge current, voltage of storage battery, capacity of storage battery, output current
Alarm Protections 1.PV array short circuit protection, PV reverse polarity protection 2.Battery reverse polarity protection , Over charging protection 3.Output short circuit protection 4.Low voltage protection for storage battery
General specification
Protection Level In compliance with regulations of DIN EN60529 and standards of IP22
Charge mode PWM ,constant current_constant voltage, function of automatic protection for storage battery
Radiating mode Fan cooling
Working mode General controller
Efficiency ≥98%
Self -consumption < 10mA < 15mA
Environment
Environmental temperature -10 --55
Ambient humidity 0--90%,No condensation
Altitude ≤4500m
Dimension
Unit size D*W*H(mm)/G.W(kg) 257.1*167.6*82.9mm/3kg
Package size D*W*H(mm)/G.W(kg) 390*365*365mm(6pcs/carton)/19kg
Payment & Shipping & Sample

1. Payment: T/T (Telegraphic transfer), and Western Union
2. Delivery time: 7 workdays for sample; 20-25 workdays for mass order
3. Shipping: DHL, FEDEX, UPS, EMS, Airway and By Sea

**Welcome Sample Order to test quality firstly**
Warranty :
Our product warranty is valid for 12 months after delivery. We undertake to repair any malfunctioned units due to defective components of inadequate workmanship ,but specially expecting any defects resulting from normal wear and tear of improper use of the products.
Guides and After-service Consultancy
Must Power Team will offer these guides below.
A. Need a Accessory
B. Products Repair
C. Power Problems to Solve
D. Power Protection Solutions, etc.

Want to know more about our Company, Products, Price, Packing, Shipping and
any discount? Let's Inquiry with Vena NOW !!!!!
 

MUST Power Limited
Vena Tang
+86-135 1038 8752